Farmville
434-391-1112

Lynchburg
434-845-5981

Rentals

Master heater model B350D burns kerosene and fuel oil, the Master heater B350D is reliable and portable high pressure kerosene forced air heater
A popular heater on loading docks, warehouses, large assembly areas and construction sites, this rugged heater consistently delivers 350,000 BTUs an hour-even in extremely cold temperatures. Heats up to 8,225 sq. ft. (100' x 82' x 8')

• 350,000 BTU output per Hour 
• 8,225 sq. ft. Heating Area 
• 1,350 CFM Hot Air Flow 
• 30.0 gal Fuel tank 
• 2.5 gal. Consumption per hour 
• 11.7 hours Operating time/tankful B 
• Continual Spark Electronic Ignition 
• 1/3 HP Motor (120V/60HZ) 
• Automatic fuel shut-off 
• Carry handle standard 
• Built in Wheel Kit 
• Built in Thermostat 
• ARL listed/certified 
• For Outdoor Use-Not for use in living areas.

      • Kerosene, #1 and #2 diesel or #1 fuel oil
      • Heats Up To 3,000 Square Feet
      • Runs Up To 10 Hours On a 13 Gallon Tank
      • Continuous Ignition with An Overheat Safety Shutoff
      • Easy-Off Gas Cap
      • Dual Powder-Coated Black Handles
      • Oversized Pneumatic Tires
      • Drain Plug
      • Electric Plug

      Includes:

      • Thermostat
      • Handle
      • Fuel Pump
      • Pressure Gauges
      • Illuminated On/Off Switch
      • Cord Caddy

      Specifications:

      • Btu/h Rating: Maximum Input - 170,000
      • Heated Air Output (CFM): 600
      • Pump Pressure (PSI): 6.5
      • Fuel Consumption: 1.3 (Gal/Hr) - Kerosene or #1 or #2 Fuel Oil
      • Tank Capacity: 13 Gallons
      • Operating Time: 10 Hours
      • Ignition Type: Direct Spark
      • Electrical Supply: 120 V x 60 Hz x 1 Ph
      • Amps: 3.2 (Continuous Operation)
      • Motor Horsepower: 1/4
      • Dimensions: 43.5" L x 23.9" W x 26.6" H
      • Weight: 53 lbs.
      • Shipping Weight: 60 lbs.
      • Case Material: Baked Enamel
      • CSA US & Canadian Certification
«StartPrev12345NextEnd» Page 1 of 5





© 2013 Pearson Equipment

Site by Olesman Development