For Sale

  • Allows multi-angle floating
  • Enables use with extension handles for extremely long ranges
  • Full pitch controlled by half turn of handle
  • Fits all magnesium bull floats without adapters
  • Fits all snap 1 3/8" and 1 3/4" snap handles without adapters


6' aluminum push-button handle, 1-3/8" diameter. Constructed of thick walled aluminum tubing. Heat-treated, lightweight. Quick connect snap spring positively locks handles in place.

Made of blue spring steel
• A C-channel runs the length of the gliders to help strengthen the blade
• Included with the gliders is a hardware package that contains two bolts, two nuts, two lock washers and two flat washers
• Rounded Ends

the 48 in. x 8 in. Magnesium Bull Float to cover a large area for leveling and smoothing the surface before the final finish. Magnesium floats offer durable and long-lasting use, providing a smoother finish than wooden floats. The included mounting bracket allows use of various handles and adapters to suit your masonry needs.

  • Wood blade -3/4" thick
  • Made with a strong structural angle "I" frame made of 1 X 1 X 1/8 steel attached with ten screws
  • Frame is heavier than other manufacturers use, giving extra strength
  • Blade ends have been sanded and tapered for easy use
  • Won't dig in to the concrete surface
  • Tough alloy steel construction.
  • Threaded lock with positive secondary is secure and easy to operate.
  • 2" eye for excellent connector compatibility and easy handling.
  • For use with 5/8" rope.
  • Unique gravity-operated safety cam prevents improper attachment.
  • Meets the requirements of OSHA 1926 and ANSI Z359.
  • Rugged, lightweight forged aluminum construction
  • Triple-locking gate for added safety and security
  • 2-1/8-Inch gate opening
  • Rated at over 5,000 pounds
  • Meets the Requirements of OSHA 1926 and ANSI Z359.1-1992(R1999)


  • 1-Inch Polyester web has a tensile strength of 9,800 pounds and features embedded wear-indicating threads
  • Rebar hook features a 2-1/2-inch gate opening
  • 1-1/4-Inch tubular polyester jacket acts as a wear pad and protects the primary webbing from abrasion and UV degradation
  • Two regular snap hooks attach to the side D-rings on full body harnesses or positioning belts
  • Meets the requirements of OSHA 1926 and ANSI Z359 and the new ANSI A10.32
  • Easily installed and removed from trusses or sheathing
  • Uses either 12 #14 x 3 1/2in. screws or 20 16d nails
  • Screw holes are countersunk so screws are flush with the anchor
  • Fits any roof peak up to 12/12
  • D-ring attachment
  • Adjustable in 5 points (with buckling leg straps) for a snug and secure fit
  • 2 lanyard keepers accommodate two lanyards for extra safety
  • 6,300 lb polyester webbing is super strong
  • Back and side D-rings allow for extra safety
  • 6 Steel D-Rings: Back, Front, Hips and Seat
  • Tongue buckle legs and quick-connect chest
  • Durable 6" Waist Pad
  • 4" padded sling for prolonged work positioning
  • Padded work seat sling
  • Padded dorsal D-ring and shoulder assembly with rugged outer shell
  • Twin torso keepers for stowing idle lanyard connectors
  • Paired friction roller torso adjusters
  • Forged alloy steel hardware
  • 5 point adjustability
  • 9 adjustment positions on belt and legs for superior fit
  • Maximum capactiy: 425 pounds

FallTech vertical lifelines are constructed of premium grade 8200lb filament and spun polyester over a polyolefin core that provides low elongation and long wear life, abrasion, UV and chemical resistance, and yet stays flexible and renders sure grip and glide through our rope grabs. We sell these life lines in 50 ft. and 75 ft. lengths.

  • Internal continuous-length shock absorber limits arresting forces to 900 pounds or less
  • Elastic leg helps to minimize tripping hazards
  • High-modulus elastic is strong and does not degrade over time
  • Light-weight design reduces end-user fatigue
  • Meets the requirements of OSHA 1926 and ANSI Z359
  • Harness features standard-duty webbing, tongue-buckle leg-straps and five-point adjustability
  • Lanyard with integral alloy steel, self-tracking grab limits arrest forces to 900 pounds or less
  • Hinged, re-usable anchor can be mounted perfectly flat, fits any roof peak
  • Comes with a handy storage bag
  • Meets the requirements of OSHA 1926 and ANSI Z359

© 2013 Pearson Equipment

Site by Olesman Development